TRENDnet TEG-160WS, TEG-240WS manual Hardware Installation

2. Hardware Installation

Note: After hardware installation is complete, use the Web-based Smart Utility to configure the TEG-160WS/TEG-240WS. To access the Web-based Smart Utility, open your web browser, and enter the default IP Address http://192.168.0.1 and default password "admin". Make sure your computer and the TEG-160WS/TEG-240WS are configured to the same network segment.

1.Connect the Power Cord to the rear of the TEG-160WS/ TEG-240WS and then to a power outlet.

2. Connect a CAT-5 RJ-45 network

cable from the computer to an available Ethernet port of the TEG-160WS/TEG-240WS.

2

English