Status | TRENDnet TEW-413APBO manual

4.4. Status

This screen displays the IEEE 802.11g AP's current status and settings. This information is read-only. This page will auto re-flash every 5 seconds to keep most update information.

LAN section will be displaying all information related on AP, such as the IP address and the current configuration type.

Wireless section will be displaying information related on the Wireless interface, such as SSID, Channel, Encryption and statistics of network traffic.

*Click the Refresh button to refresh the AP's status and settings.

User’s Guide

15

Image 15

TRENDnet TEW-413APBO manual Status

Contents

User’s Guide Copyright Statement Troubleshooting Introduction For TEW-412APBOFor TEW-413APBO Safety Notification AP Default Settings Turn on Power Supply Web Management Settings Make Correct Network Settings of Your Computer Primary Setup Wireless Settings Key WPA-Preshared keyAlgorithms WPA Shared Server Port Default port being used is Radius server will accept the authentication if bothPlease choose your algorithms method. You can select System Operating Mode User’s Guide Status Traffic Log Access Control Authentication Type Advanced Wireless User’s Guide Physical SNMPv2cIdentification Contact Description description To upgrade the AP’s firmware Upgrade Firmware User’s Guide Can’t connect to other computers on my LAN LAN Connection Problems I can’t access my AP User’s Guide Limited Warranty