AP Default Settings | TRENDnet TEW-413APBO instruction

3.AP Default Settings

The default settings are shown following.

User	admin
Password	admin
AP IP Address	192.168.1.250
AP Subnet Mask	255.255.255.0
RF ESSID	ap11g
11g RF Channel	6
Mode	11b+g
Encryption	Disabled

User’s Guide

6

Image 6

TRENDnet TEW-413APBO manual AP Default Settings

Contents

User’s Guide Copyright Statement Troubleshooting Introduction For TEW-412APBOFor TEW-413APBO Safety Notification AP Default Settings Web Management Settings Turn on Power Supply Primary Setup Make Correct Network Settings of Your Computer Wireless Settings WPA Shared WPA-Preshared keyAlgorithms Key Server Port Default port being used is Radius server will accept the authentication if bothPlease choose your algorithms method. You can select System Operating Mode User’s Guide Status Traffic Log Access Control Advanced Wireless Authentication Type User’s Guide Description description SNMPv2cIdentification Contact Physical Upgrade Firmware To upgrade the AP’s firmware User’s Guide LAN Connection Problems I can’t access my AP Can’t connect to other computers on my LAN User’s Guide Limited Warranty