UNPACKING AND SETUP
This chapter provides unpacking and setup information for the Wireless USB 2.0 Adapter.
Unpacking
Open the box of the Pen Size Wireless USB 2.0 Adapter and carefully unpack it. The box should contain the following items:
One 802.11g Pen Size Wireless LAN USB 2.0 Adapter
One Driver & Utility
One
If any item is found missing or damaged, please contact your local reseller for replacement.
Setup
The setup of the Wireless USB 2.0 Adapter can be performed using the following steps:
Visually inspect the USB connector and make sure that it is fully plugged in to the system’s USB port.
Make sure that there is a well environment that there is no much intrusion to have a better connection.
Connecting the USB Extension Cable
The USB extension cable that comes with the Adapter has Type A connectors on both ends. One is a male Type A connector that plugs into the PC’s USB port, and the other is a female Type A connector that plugs into the Adapter.
This USB extension cable have a special function, it can be twist to any direction to have the best connection in the air. It is recommended that the Pen Size Wireless USB Adapter was vertically plane with the ground.
2
