LAN
Ethernet port with 10/100Mbps Fast Ethernet connections, connect this port to switch/hub.
RESET
The Reset function is to reset the setting back to factory default setting, once you press the “RESET” button more than 5 seconds.
Power
Connect the Power Adapter DC plug to the AP’s power jack.
Antenna
One external dipole antenna.
Hardware connections
Connect to the Switch/Hub
1.Plug in one end of the RJ45 network cable to the Switch/Hub port,
2.Plug in the other end of the RJ45 network cable to the Wireless Access Point.
Check the installation
The LEDs of the Access Point are clearly visible and the status of the network link can be seen instantly:
1.With the power source on, once the device is connected, the Power, LAN and WLAN port LEDs will light up indicating a normal status.
4
