TRENDnet TEW-509UB manual LCD Display

3.3LCD Display

The illustration below shows the icons in the LCD. All the icons will not necessarily appear together as shown here.

3 4 5 6 7

2

1

1SSID:

2Channel:

3Found:

4Power:

5Scan mode:

6Security

7Signal Strength

Displays the SSID of the current connection. Scrolls horizontally for longer names.

Displays the channel number of the current connection.

Displays the number of connections found. Up to 16 connections can be monitored.

Indicates the battery status: low;

fully charged; recharging.

Press and hold the Seek button to scroll through the three modes: [S]; [F]; and [D].

Scan results are ranked in order of signal strength.

Only lists open hot spots ranked in order of signal strength.

Continually refreshes details of the selected hot spot. Allows you to lock on and monitor the signal strength as you move around.

Displays the security settings of the network:

[WEP]/[WPA] security enabled; security disabled.

Displays the signal strength (five levels) and radio band: [G]/[B] 802.11a/b/g.

Fully charged and Recharging icons would appear during charging process only.

3.4Finding a HotSpot

Refer to the following to find a hot spot.

3.Switch Power to ON. The TEW-509UB boots and searches for hot spots.

4.Press Next to scroll the available hot spots.

3.5Accessing a HotSpot

5.Connect the TEW-509UB to your computer and open the Wireless Client Utility.

6.Open the SiteSurvey screen and select the hot spot you want to access.

7.Click Connect to access the hot spot.

21