TRENDnet TEW-812DRU Connect wireless devices to your router, Connect wireless devices using WPS

TRENDnet User’s Guide			TEW-812DRU
The following section outlines options when selecting PSK (Preshared Key Protocol),	Connect wireless devices to your router
• WPA Encryption: Select a Cipher Type to use. When selecting WPA-PSKsecurity, it	A variety of wireless network devices can connect to your wireless network such as:
is recommended to use TKIP + AES.
o When selecting WPA2-PSK Mixed security, it is recommended to use TKIP+AES.	• Gaming Consoles
o When selecting WPA2-PSKsecurity, it is recommended to use AES.	• Internet enabled TVs
• WPA passphrase: Enter the passphrase.	• Network media players
o This is the password or key that is used to connect your computer to this router	• Smart Phones
wirelessly	• Wireless Laptop computers
Note: 8-63 alphanumeric characters (a,b,C,?,*, /,1,2, etc.)	• Wireless IP cameras
• Network Key Rotation Interval: Enter the time interval (seconds) of when the
network key will rotate. passphrase.
	WEP Key Format	HEX	ASCII
Note: Your passphrase will not change, rotation key is design to rotate the key to
	Character set
prevent wireless intruders.		0-9 & A-F, a-f only	Alphanumeric (a,b,C,?,*, /,1,2, etc.)
Selecting WPA, WPA2, or WPA2Mixed:	64-bit key length	10 characters	5 characters
	128-bit key length	26 characters	13 characters
	Each device may have its own software utility for searching and connecting to available
	wireless networks, therefore, you must refer to the User’s Manual/Guide of your
	wireless client device to determine how to search and connect to this router’s wireless
	network.
The following section outlines options when selecting WPA. WPA2 or WPA2 Mixed or	See the “Appendix” on page 58 for general information on connecting to a wireless
	network.
EAP (Extensible Authentication Protocol). Also known as called Remote Authentication
Dial-In User Service or RADIUS.	Connect wireless devices using WPS
Note: This security type requires an external RADIUS server, PSK only requires you to
create a passphrase.	WPS (Wi-Fi Protected Setup) is a feature that makes it easy to connect devices to your
• Radius Server: Enter the IP address of the RADIUS server. (e.g. 192.168.10.250)	wireless network. If your wireless devices support WPS, you can use this feature to
• Radius Port: Enter the port your RADIUS server is configured to use for RADIUS	easily add wireless devices to your network.
authentication.	Note: You will not be able to use WPS if you set the SSID Broadcast setting to Disabled.
Note: It is recommended to use port 1812.

•	RADIUS Key: Enter the shared secret used to authorize your router with your	There are two methods the WPS feature can easily connect your wireless devices to
		your network.
	RADIUS server.
		• Push Button Configuration (PBC) method

o RECOMMENDED Hardware Push Button method–with an external button located physically on your router and on your client device

o WPS Software/Virtual Push Button - located in router management page

© Copyright 2013 TRENDnet. All Rights Reserved.

16