Chapter 6: Specifications
Hardware
Standards | IEEE 802.3, IEEE 802.3x, IEEE 802.3u, HomePlug® AV | |
|
| |
Interface | 3 x 10/100Mbps | |
| Power prong | |
|
| |
Frequency Band | 2 ~ 28 MHz | |
|
| |
Modulation | OFDM Symbol Modulation on link synchronization, 1024/256/64/8 - | |
| QAM, QPSK, BPSK, ROBO Carrier | |
|
| |
Protocol | TDMA, and CSMA/CA | |
|
| |
Speed | Powerline: Up to 200Mbps** | |
| Ethernet: Up to 200Mbps (Full Duplex mode) | |
|
| |
Utility OS Compatibility | Windows 7 | |
|
| |
Nodes | Up to 64 max. | |
| Recommended: up to 16* per Powerline network | |
|
| |
Overlapping | Up to 4 (per electrical system) | |
Powerline Networks |
|
|
|
| |
Coverage | Up to 300m (984ft.) | |
|
| |
Security | ||
|
| |
LED | Power (PWR), Ethernet Link/Act | |
| Powerline (PL) with Connection Quality Indication | |
| ∙ | Best (Green) |
| ∙ | Better (Amber) |
| ∙ | Good (Red) |
Buttons | Sync, Reset | |
|
| |
Dimension (L x W X H) | A: 103 x 74 x 57 mm (4.1 x 2.9 x 2.2 in.) | |
| EU: 103 x 74 x 72 mm (4.1 x 2.9 x 2.8 in.) | |
|
| |
Weight | A: 165 g (5.8 oz) | |
| EU: 170 g (6.0 oz) | |
|
| |
Power Source | A: 100~230V AC, 50~60Hz | |
| EU: 220~240V/ 5A AC, 50Hz | |
|
| |
Consumption | Active mode: 3.2 Watts (max.) | |
| Standby mode: 0.9 Watts (max.) | |
|
| |
Temperature | Operating: 0° ~ 40°C (32° ~ 104°F) | |
| Storage: | |
|
| |
Humidity | Max. 90% | |
|
|
|
Certifications | CE, FCC |
|
|
|
|
*Maximum of 16 adapters (nodes) recommended for streaming video across your network. Additional adapters may decrease performance.
**200Mbps is the maximum theoretical Powerline data rate. Actual throughput will vary depending on environment.
***Networked Powerline devices need to be plugged into power outlets that are on the same electrical system.
