![8. Click Next.](/images/new-backgrounds/48061/4806111x1.webp)
7. The Setup Wizard will automatically appear. Click Setup Wizard if the Setup Wizard does not automatically appear.
8. Click Next.
9.For DHCP, click on the drop down arrow and Select Client for DHCP to have the
IP address: The assigned IP address should match your network (e.g. 192.168.10.x, 192.168.0.x, 192.168.1.x). This IP address should not be used by any other network device on your network.
Subnet Mask: In most cases, the default
Subnet Mask (255.255.255.0) should be fine.
Then click Next.
Note: It is recommended to manually configure the LAN Interface Settings (IP address and Subnet Mask) in case you need to access the
4