7.After I successfully configured the Access Point to meet my network settings, I cannot connect to my network using wireless computers.
If you have a DHCP server in your network, you need to go into TCP/IP settings again and
8.All the settings are correct, but I cannot make a wireless connection to the Access Point.
1.Double check that the WIFI light on the Access Point is lit.
2.Power cycle the
3.Contact the manufacturer of your wireless network adapter. Make sure the wireless network adapter is configured with the proper SSID. The default SSID of the Access Point is TRENDnet310. If you have enabled encryption on the Access Point, make sure to configure the wireless network adapter with the same encryption key.
If you still encounter problems or have any questions regarding the
14