Antenna Base Mounting Methods & Configuration
PLEASE READ THE FOLLOWING INSTALLATION
STEPS BEFORE DRILLING HOLES IN THE WALL.
Press Tab | Lift Cover | Remove weight plate |
After removing the bottom cover from its seating, remove the metal weight plate from the ceiling clips to expose the screw holes.
In order to decrease the weight and increase the magnetic power, it is highly recommended that the metal plate be removed before installing antenna onto ceiling, partition, or any metal surface.
Select location | Place | Mark screw |
| base template | position |
WARNING: Please make sure that the AP / Client device can reach your selected antenna position (Antenna Cable is 1 meter / 3 feet)
After you have marked the wall for the appropriate drilling sites, re- assemble the antenna stand without the metal weight. The clips should not protrude.
4
English
