TRENDnet TRENDnet antenna, TEW-AI86DB manual Troubleshooting, Certifications

Troubleshooting

Q1. How come I cannot transmit or receive Wi-Fi signals with my TEW-

AI86D?

A1. The TEW-AI86D is a directional antenna and can only send and receive signals from the front panel. Make sure to adjust the position of the antenna by directing the front panel to laptops, PCs or other wireless devices.

Q2. My access point indicates that it is receiving power, and my laptop

is within range of the TEW-AI86D. However, my laptop does not

receive any signals from my access point.

A2. Make sure that you properly connect the antenna to the Wi-Fi Access Point. (See 2. Hardware Installation)

Q3. Why won’t the TEW-AI86D work with my IEEE 802.11a Wireless

Router or Access point?

A3. Yes. The TEW-AI86D is compatible with IEEE 802.11a/b/g wireless devices.

Q4. Is it necessary to use the tapping screws or the wall anchors that

come with the TEW-AI86DB?

A4. It is only necessary if you decide to mount the TEW-AI86DB at a permanent location. Use discretion when attaching mounting brackets to the TEW-AI86DB.

If you have any questions regarding the TEW-AI86D/TEW-AI86DB, please contact TRENDnet Technical Support Department.

Certifications

This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference.

(2)This device must accept any interference received. Including interference that may cause undesired operation.

Waste electrical and electronic products must not be disposed of with household waste. Please recycle where facilities exist. Check with you Local Authority or Retailer for recycling advice.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

7