IX. Troubleshooting
Problem | Possible Cause | Check | |
Clock does not | Poor signal Reception | Reposition or relocate | |
set from Atomic |
| clock. Keep unit away | |
Synchronization |
| from monitors and other | |
|
| sources of radio | |
|
| interference. | |
| Unable to receive Atomic | Please refer to the | |
| Signal | programming steps on | |
|
| page 9 to set time and | |
|
| date. | |
Clock does not | AC power is OFF | Restore power | |
accept time | Power cord is | Plug cord into outlet | |
cards | |||
disconnected |
| ||
|
| ||
| AC fuse blown | Replace AC240V 1A fuse | |
| DC fuse blown | Replace DC 12V 2A fuse | |
| T100 in “Program” mode | Return switch to | |
|
| “Normal” position | |
Printing light | Worn ribbon | Replace ribbon cassette | |
| Ribbon cassette not | Reinstall ribbon cassette | |
| seated correctly |
| |
Printing in | Incorrect pay period | Set correct day | |
wrong position | starting day |
| |
| Time card inserted | Insert card correctly | |
| incorrectly |
| |
Not printing | Printing head fuse blown | Replace DC 12V 1.5 Amp | |
|
| fuse | |
| Ribbon cassette not | Reinstall ribbon cassette | |
| seated correctly |
| |
Clock stopped | AC power is off | Restore power | |
| Power cord is | Plug cord into outlet | |
| disconnected |
| |
| AC fuse blown | Replace AC240V 1A fuse |
21
