VII. Installing the T100, Wall Mounting Template | Timex instruction

VII. Installing the T100

The T100 may be installed on a flat surface or wall-mounted. No special wiring is needed. However, we recommend installing the T100 on a separate power circuit. We do not recommend using a power strip. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock.

Wall-mounting

1.Using Wall Mounting Template install screw (included) in wall at position A, 37” to 49” above floor. Leave a 1/8” gap between the screw head and wall. Use a screw anchor (included) if necessary.

Wall Mounting

Template

2.Install screws (included) at positions B and C with 1/8” gap between the screw head and wall. Install screw anchors (included) if necessary.

3.Use two M4X10 screws (included) to attach the wall-mounting bracket to the bottom of the T100.

18

Image 21

Timex user manual VII. Installing the T100, Wall Mounting Template, Wall-mounting

Contents

Page Time Clocks Table of Contents Overview Introduction Features SpecificationsAccessories Template FrontBack III. Location of Components IV. Quick Setting the T100 Default SettingsSetting Programming Outline Setting the T100 Programming Hints Enter Programming Mode To Set Weekly Pay Periods Setting Pay Period and Current Print Line Setting 12- or 24- Hour Print Format Setting Year, Month, and Date Date may be set using Setting the Minute Printing Format Setting the Day Change TimeSetting Time Zone Daylight Saving Time DST Inputting the Default Password IN1 OUT1 Setting Two-Color Printing IN1 OUT1 Event Max Signal Tone Description Setting the Signal Tone Times Setting Signal Duration Exiting Program Mode Changing the Default Password Punching Time Card VI. Operating the T100 VII. Installing the T100 Wall Mounting TemplateWall-mounting Page Replacing the ribbon VIII. Maintenance Problem Possible Cause Check IX. Troubleshooting Location of fuses Error Codes Warranty Product Registration Card 06-0337-000 Rev. C