TRENDnet TV-IP100W manual System Administration DateTime, IP Address, Protocol, TimeZone

System Administration – DateTime

The DateTime menu contains commands for setting the Wireless Internet Camera's time and date requirements to provide correct information to users who might be thousands of miles away in the remote site. There are two options to select from the DateTime menu bar either Synchronized with Time Server or Set Manually.

Click “DateTime” in the system administration menu bar and the DateTime screen will appear as illustrated below:

Click “Home” to return to Welcome Screen

DateTime:

Select “Synchronized with Time Server” and the time will be based on GMT setting. The time will be synchronized every 10 minutes. This is also the default setting for the Wireless Internet Camera.

IP Address:

Enter the IP Address of the Time Server in this field.

Protocol:

Two options of NTP or Time are available for your selection to link with the Time Server. The default setting is NTP.

TimeZone:

The system administrator must select the time zone for the region.

Please refer to the appendix for the time zone selection table.

To set the Date Time manually, select “Set Manually” and the system administrator must enter the Date and Time in the respective field manually.

Note:

When you select Set Manually, every time when the Wireless Internet Camera is powered off and on, you must re-enter the details once again due to time lost.

Save/Cancel:

After making sure all settings in the DateTime are correct, click the “Save” button to store the settings for the Wireless Internet Camera. You can alternatively click the “Cancel” button to restore all settings to the values last saved to or retrieved from the Wireless Internet Camera.

42 43