TRENDnet TV-IP110W manual Configure the Internet Camera, IPSetup

3. Configure the Internet Camera

Note:

1.It is recommended that you configure the Internet Camera from a wired computer.

2.If you would like to use SecurView software, please refer to the User's Guide on the CD for more information.

1.Insert the Utility CD-ROM into your CD-ROM drive and then click IP Setup.

2.Follow the Installation Wizard instructions and then click Close.

3.Go to Start -> Programs -> TRENDnet -> IPSetup and click

IPSetup.

Note: By default, the IP setting on the TV-IP110/TV-IP110W is set to DHCP. Please skip to step 8. If you want to give the TV-IP110/TV-IP110W static IP address, continue on to step 4.

4.Select the Internet Camera and click Change IP.

4

English