| TROUBLESHOOTING | |
Symptom | Possible Reason | Possible Solution |
|
|
|
Unit does not turn on | • Unit not plugged in | • Plug unit in |
| • No power at outlet | • Try a different outlet |
|
|
|
Little or no mist is produced | • Unit not plugged in | • Plug unit in |
| • No power at outlet | • Try a different outlet |
| • No or less water in tank | • Fill the water tank |
| • Unit is not level | • Set unit on a flat level surface |
| • Water tank is not on properly | • Position the points to meet |
|
| at center |
| • Water Tank Cap is clogged | • Push the water tank cap |
|
| spring to release water from |
|
| the tank. Rinse the tank and |
|
| change the water. |
| • Wrong button was pushed or | • Push the water tank cap |
| wrong setting was chosen | spring to release water from |
|
| the tank. Rinse the tank and |
|
| change the water. |
|
|
|
Smelly mist | • New machine | • Clean the unit before use and |
|
| let stand for 12 hours |
| • Dirty water or stale water | • Replace the water with clean |
|
|
|
Vibrating noises | • Tank in incorrect position | • Position the points to meet |
|
| at the center |
| • No or less water in tank | • Fill the Water Tank |
| • Unit is not level | • Set unit on a flat level surface |
|
|
|
White dust on surfaces | • Hard water used | • Use distilled water |
| • Unit is dirty | • Perform weekly maintenance |
|
|
|
10
