4.Operation Controls and Functions
4.1Transmitter (Tx) Unit
1 | 2 | 3 | 4 | 5 |
1HDMI INPUT: Connect to the HDMI output of your source equipments such as a DVD player or
2POWER INDICATOR LIGHT: illuminates when unit is plugged into 5VDC power supply
3DC 5V: Connect the 5V DC power supply to the HX1RG6. Then connect the adaptor to an AC wall outlet
4IR EMITTER: Connect IR emitter cable (included) to this input. Place the eye of the emitter in front of the source equipment.
5OUTPUT: Connect the output of the Transmitter to the INPUT of the Receiver using a 75 ohm RG6/U cable that has been terminated with 75 ohm BNC male connectors.
Note: Do not use BNC connectors that require screws or clamps to secure the connector to the cable. For best results only use BNC plugs that are secured using a Linear Compression Crimping Tool.
3
