Tributaries HX1RG6 manual Receiver Rx Unit

4.2 Receiver (Rx) Unit

1 2 3 4 5 6 7

1DC 5V: Connect the 5V DC power supply to the HX1RG6. Then connect the adaptor to an AC wall outlet

2INPUT: Connect the OUTPUT of the transmitter to the INPUT of the receiver using an RG6 cable terminated with 75 ohm BNC connectors.

Note: Do not use BNC connectors that require screws or clamps to secure the connector to the cable. For best results only use BNC plugs that are secured using a Linear Compression Crimping Tool or soldering.

3OUTPUT: Connect the output to a 2nd HX1RG6-RX Receiver for cascading up to 4 times to multiple displays

4IR EXTENDER: Connect an IR receiver cable (included) to this input. Place the eye in front of the display, then use the existing remote to control the source equipment.

5HDMI OUTPUT: Connect an HDMI cable to the display

6IR: To use this built-in IR receiver, simply place the receiver in front of the display and use the existing remote to control the source equipment.

7Power LED: This LED indicator will activate once the included 5V DC power adapter has bee properly connected between the Receiver unit and an open wall power socket.

4