HOW TO FINISH UNPACKING

Place packed cooker next to the cabinet in which it will be installed.

Remove the cooker packing except for bottom tray which should be left in position until the

lcooker is ready to be fitted into its cabinet.

Ensure the owner is given these operating instructions.

TOOLS REQUIRED

The following tools will be needed and its helps to assemble them before starting to install your oven:

A terminal screwdriver (3mm wide blade)

A pozidrive screwdriver

Pliers

Wirestrippers

Knife

Sidecutters

Adhesive Tape

Tape Measure

MAKING THE ELECTRICAL CONNECTIONS

Important: Switch off at mains, miniature circuit breaker and, if appropriate, remove fuse before commencing any electrical work.

PREPARING CABLE

We recommend you use a new length of cable to ensure your safety.

Ensure you have the correct length of cable appropriate to the wiring method you are using. When fitting new cable allow sufficient cable for removal of the unit at a later date, should it be necessary.

Score, but do not cut through, around the sheathing with a knife 100mm (4in) from each end of the cable and break through to the encased wires by bending the cable backwards and forwards to fatigue the sheathing.

Carefully score down from each end of the cable sheathing along the length of the bare earth wire (if a cut was made along the length of the live and neutral wires, it might cut into their

lsheathing) to the cuts already made.

Carefully prise open the sheathing at each end of the cable to expose the encased wiring.

TO REMOVE COVER OF MAINS TERMINAL

From the rear of the cooker, remove mains input lterminal cover to gain access to terminal block.

First remove retaining screw with pozidrive

lscrewdriver. See Fig. 3.

Pozidrive

Screwdriver

Fig.3

Prise cover loose using screwdriver in position

(1)then lever off with screwdriver in position (2) lat either side. See Fig. 4.

 

 

 

 

 

 

 

 

(2)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Terminal

 

 

 

 

 

 

 

(1)

 

Fig.4

Screwdriver

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Lift cover and remove screw from cable clamp. See Fig. 5.

Cable

Clamping

Block

Fig.5

10

Page 9 Page 11
Page 10
Image 10
Tricity Bendix BD 931 Making the Electrical Connections, HOW to Finish Unpacking, Tools Required, Preparing Cable
Page 9 Page 11

BD 931, BD 921/2 specifications

The Tricity Bendix BD 921/2 and BD 931 are modern washing machines that exemplify efficiency, reliability, and user-friendly design. These models cater to the needs of households by combining innovative technologies with ease of use, making laundry tasks less cumbersome and more efficient.

One of the key features of the BD 921/2 is its outstanding energy efficiency. It boasts an A+++ rating, which signifies that it consumes minimal energy while providing exceptional cleaning performance. This not only contributes to significant savings on energy bills but also reduces the environmental footprint, aligning with today’s eco-conscious lifestyle.

The BD 931 builds upon this legacy, offering a larger capacity, which is especially beneficial for families or those who frequently do laundry. With a drum capacity of up to 9 kg, users can wash more clothes in one cycle, saving time and water. This model also features a robust spin speed of up to 1400 RPM, ensuring that clothes come out cleaner and with less moisture, thus reducing drying time.

Both models are equipped with a variety of wash programs tailored to different fabric types and cleaning needs. Options such as cotton, synthetic, delicate, and wool cycles allow users to select the ideal settings for their laundry, ensuring optimal cleaning while caring for garments.

Another notable technology featured in these machines is the electronic control system. This intuitive interface simplifies the selection of programs and settings, providing a clear display of the cycle status and remaining time. Users can also take advantage of additional features such as delay start, which allows them to set a wash cycle to begin at a convenient time.

Moreover, the machines prioritize noise reduction thanks to advanced insulation and motor technology. They operate quietly, making them suitable for homes where noise can be a concern, especially during nighttime usage.

Durability is also a hallmark of both the BD 921/2 and BD 931 models. Constructed with high-quality materials and components, these machines promise longevity and reliable performance through years of use.

In conclusion, the Tricity Bendix BD 921/2 and BD 931 washing machines represent modern washing technology with a blend of energy efficiency, user-friendly features, and robust performance. They are ideal for those seeking a conscientious laundry solution that does not compromise on quality or convenience.
Top Page Image Contents