After the machine has started, only the running phase pilot light stays on.
When the pilot light “prewash/wash” comes on this means that the machine is performing the prewash or wash phase. If you have selected the “prewash” function, this light will be on during the prewash phase too.
The “end” pilot light flashes in the event of operating problems:
-4 flashes = the door has not been closed
-2 flashes = the machine does not empty
-1 flash = the machine does not fill
To eliminate the problem, see paragraph “Something not working”.
When the light goes out, the door can be opened (see page 9).
8 Programme selector dial
PROGRAMME
15 
1
142
13 | 3 |
|
12
4
11
5
10
6
9 8 7
The selector dial can be turned either clockwise or anticlockwise.
Position O corresponds to Reset programme / Switching OFF of the machine.
ATTENTION!
If you turn the programme selector dial to another programme when the machine is working, the lights of the programme progress display start to flash. The machine will not perform the new selected programme.
Programme information
10 = Wool
The wool wash cycle of this machine has been approved by Woolmark for the washing of machine washable Woolmark products provided that the garments are washed according to the instructions on the garment label and those issued by the manufacturer of this washing machine. M9604.
12 = Quick and Cool
This is a complete programme to be used for lightly soiled laundry or for laundry which needs freshening up (not available for wool).
Max load: 2. kg .
Washing temperature: 30°C
Number of rinses: 2 .
Programme duration: 30 minutes.
Short spin at 700 r.p.m max.
13 = Rinses
With this programme is possible to rinse and spin garments which have been washed by hand.
The machine performs 3 rinses, followed by a final short spin at the maximum speed that can be reduced selected by means of the relevant button.
14 = Drain
For emptying out the water of the last rinse in programmes with the “rinse hold” option.
Turn first the programme selector dial to O, then select drain programme 14 and depress the “start pause” button.
15 = Spin
Separate short spin for hand washed garments and after programmes with “rinse hold” option. Before selecting this programme the selector dial must be turned to “O”. You can choose the speed by means of the relevant button to adapt it to the fabrics to be spun.
7
