TO REPLACE THE OUTER DOOR GLASS
1.Holding the door glass panel with both hands, gently place the locators into the holes of the brackets at the bottom of the oven door.
2.Holding the door glass with your left hand, use your right hand to open the oven door. Bring the door gently towards the glass panel ensuring the screw location holes line up.
3.Place the trim in the correct position on the top of the grill door.
4.Hold the glass in place with one hand and insert the cross head screws with washers into the location holes with the other hand. Give the screws one turn to ensure the glass is secure.
5.Tighten the screws positively with a Pozidrive screwdriver before closing the oven door.
DO NOT attempt to use the oven without the glass being in place.
TO CLEAN THE INNER GLASS DOOR
The inner glass door is not removable. Clean using hot soapy water or Hob Brite and a soft cloth. DO NOT use abrasives as they may damage the glass or seal.
CLEANING INSIDE THE OVENS
The oven top, sides and back panels are coated with a Stayclean finish.
The Stayclean areas should not be cleaned manually. See Care of Stayclean Surfaces on page 31.
The base of the ovens can be cleaned using normal oven cleaners or aerosol oven cleaners with care. Ensure that the manufacturers instructions are followed and that all parts are well rinsed afterwards.
Do not use any cleaning agents or scrapers on the oven tops, sides, back panels and door seals.
Damage will occur if soap impregnated steel wool pads, aerosol cleaners or any abrasive cleaners are used.
30
