12.Refit the top door by carefully sliding it onto the upper hinge pin (P).
13.Turn the centre hinge (H) around from its illustrated position and transfer it to the opposite side. Gently press the centre hinge up into the door.
To secure the centre hinge to the cabinet, refit
screw (J). Ensure the top door is correctly |
| |
aligned before fully tightening the screws (J) | B | |
and (G). This can be achieved by sideways |
| |
movement of the centre hinge. |
| |
14. Refit the bottom door by sliding it onto the | A | |
centre hinge pin. Take the bottom hinge foot | ||
| ||
assembly (B) and transfer it over to the |
| |
opposite side of the cabinet, being careful to |
| |
retain any spacer washers fitted onto the | C | |
bottom hinge pin. Push the hinge foot | ||
| ||
assembly (B) into the door bearing using the |
| |
pin of the foot for location. Three holes will |
| |
then line up with the hinge foot and screws (C) |
| |
should be used to secure the hinge. Refit |
| |
level adjuster and spacer (A) in the opposite |
| |
side of the cabinet. |
|
15.The base of your product should now be in line with the diagram.
16.Stand the appliance upright.
21
