12.Refit the top door by carefully sliding it onto the upper hinge pin (F).
13.Turn the centre hinge (L) around from its illustrated position and transfer it to the opposite side.
14.Gently press the centre hinge up into the door.
15.Secure the centre hinge to the cabinet, refit screw secure (J). Ensure the top door is correctly aligned before fully tightening the screw. This can be achieved by sideways movement of the centre hinge.
16.Refit the bottom door by sliding it onto the centre hinge pin.
17.Take the bottom hinge foot assembly (B) and transfer it over to the opposite side of the cabinet, being careful to retain any spacer washers fitted onto the bottom hinge pin. Push the hinge foot assembly (B) into the door bearing using the pin of the foot for location. Three holes will then line up with the hinge foot and screws (C) should be used to secure the hinge.
18.Refit level adjuster and spacer (A) in the opposite side of the cabinet.
19.Stand the appliance upright.
Side Fixed Handle Change
If your appliance is fitted with a side fixed handle:
To fix the handle on the opposite side proceed as follows:
i)Protect the paintwork on the door from damage with masking tape or other suitable material while using a blunt knife or similar instrument to carefully prise out the plastic plugs from alternative handle positions on the opposite side of the door.
ii)Remove the screw covers and screws from the handle and transfer it to its new position replacing the plastic plugs into the vacated screw holes.
20
