Door reversal directions
1.Disconnect from the electricity supply.
2.Remove all loose items, including food, store food in a cool place.
3.Remove the plastic cover (A) (which has a
4.Remove bottom hinge (C).
5.Slide out the lower door from middle hinge (H) and remove the latter.
6.Slide out the upper door from pin (D), unscrew the latter and then screw it down into the hinge provided on the opposite side;
7.Refit the upper door and the middle hinge on the opposite side.
8.Refit the lower door and bottom hinge (C) on the opposite side,after having removed the plugs (B) and screws; these must then be refitted in the holes on the opposite side;
9.Refit the plastic cover (A)on the bottom hinge;
10.Remove the handles and refit them on the opposite side. The holes that are not used are to be masked with the plastic plugs removed.
Warnigs:
After having reversed the opening direction of the doors, check that all the screws are proporly tightened.
Attention
After completion of the door reversing operation, check that the door gasket adheres to the cabinet. If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket or accelerate this process by heating up the part involved with a normal hairdrier.
| C |
B | A |
| |
D589 |
|
| H |
D |
D590 |
PR184 |
Printed on recyclated paper
19
