INTRODUCTION

WARNING: THIS APPLIANCE MUST BE EARTHED

RATING PLATE

This is situated on the lower front frame of the appliance and can be seen upon opening the door. Alternatively the rating plate may also be found on the back or top of some models (where applicable).

The appliance must be protected by a suitably rated fuse or circuit breaker. The rating of the appliance is given on the rating plate.

Do not remove the rating plate from the appliance as this may invalidate the guarantee.

INSTALLATION

If your appliance has been damaged in transit, contact your supplier immediately. DO NOT attempt to install it.

Your appliance left the factory fully packaged to protect it from damage. If it is delivered without packaging and damage has occurred, the manufacturer cannot accept responsibility. Contact your supplier for advice.

Once the packaging has been removed the appliance should only be moved by hand. DO NOT use a sack barrow or any other aid to lift the appliance as damage may occur.

Connection to the electricity supply must be carried out by a qualified electrician/competent person.

The electrical connection should be made using a double pole isolating switch (cooker socket) with at least 3mm contact separation in all poles. The cable must have conductors of sufficiently high cross- sectional area to prevent overheating and deterioration.

The recommended cross-section area is six square millimetres (6.00mm2).

The cable should be routed away from potentially hot areas marked by X in the diagram below.

To move the appliance, open the oven door, and lift the appliance by holding inside the top of the compartment.

This is a type X appliance, which means it is free- standing and can be fitted with cabinets on one or both sides. It may also be fitted in a corner setting.

Side walls which are above hob level should be protected by heat resistant non-combustible material and MUST NOT be nearer than 40mm to the hob side.

A nominal air gap of 2mm at either side of the appliance is required to enable the appliance to be moved into position. It is recommended that proprietary trims are fitted to protect the worktops of either side of the appliance. These are available from most DIY stores.

Always ensure an air gap is maintained at hotplate level. Tiles or other forms of deep wall covering should not obscure this gap.

Air gap

Overhanging surfaces or a cooker hood should be a minimum of 685mm above the hob.

8

Page 8
Image 8
Tricity Bendix SE323 installation instructions Introduction, Rating Plate, Installation

SE323 specifications

The Tricity Bendix SE323 is a highly regarded electric oven that combines practicality with advanced cooking features, making it a valuable addition to any modern kitchen. This appliance is designed to meet the demands of both amateur cooks and seasoned chefs, offering versatility and efficiency.

One of the standout features of the Tricity Bendix SE323 is its multifunctional capability. The oven comes equipped with multiple cooking modes, including fan-assisted cooking, conventional heating, and grill settings. This variety allows users to prepare different dishes simultaneously, ensuring optimal results whether baking, roasting, or grilling.

Another key characteristic of the SE323 is its spacious interior. With a generous capacity, it can accommodate large meals, making it perfect for families or entertaining guests. The interior is thoughtfully designed with removable shelves, enabling users to optimize space based on their cooking needs.

The Tricity Bendix SE323 also incorporates advanced heating technologies. Its fan-assisted cooking system ensures even heat distribution, which leads to consistent cooking results. This feature is particularly beneficial when baking, as it helps eliminate cold spots and promotes uniform browning of pastries and bread.

Ease of use is a core element of the SE323 design. The oven features intuitive controls with clear indicators, allowing users to select their desired settings quickly. Additionally, the oven is equipped with a digital display that provides precise temperature settings, ensuring accurate cooking every time.

Cleaning the SE323 is made simple with its enamel interior. The smooth surface minimizes food residue buildup, making post-cooking maintenance hassle-free. Furthermore, the oven is designed with safety in mind, with triple-glazed doors that reduce exterior heat, providing a cooler touch for added security.

In terms of energy efficiency, the Tricity Bendix SE323 is well-positioned in the market. It operates at a lower power consumption level compared to traditional ovens, promoting eco-friendly practices without sacrificing performance.

In conclusion, the Tricity Bendix SE323 is a versatile and efficient electric oven that features advanced cooking technologies, a spacious interior, and user-friendly controls. With its array of cooking options and ease of maintenance, it stands out as a reliable appliance for anyone looking to enhance their culinary experience. Whether you are baking a cake, roasting a chicken, or grilling vegetables, the SE323 consistently delivers excellent results, making it a worthwhile investment for any kitchen.