INTRODUCTION

WARNING: THIS APPLIANCE MUST BE EARTHED

RATING PLATE

Record the model, product and serial numbers on the back cover of this instruction book, from the rating plate. This is situated on the base of the appliance on the front right hand side.

The appliance must be protected by a suitably rated fuse or circuit breaker. The rating of the appliance is given on the rating plate.

Do not remove the rating plate from the cooker as this may invalidate the guarantee.

INSTALLATION

This appliance complies with Radio Interference requirements of EEC Directive 87/308/EEC.

If your cooker has been damaged in transit, contact your supplier immediately. DO NOT attempt to install it.

Your cooker left the factory fully packaged to protect it from damage. If it is delivered without packaging and damage has occurred, the manufacturer cannot accept responsibility. Contact your supplier for advice.

Once the packaging has been removed the cooker should only be moved by hand. DO NOT use a sack barrow or any other aid to lift the cooker as damage may occur.

Connection to the electricity supply must be carried out by a qualified electrician/competent person.

The electrical connection should be made using a double pole isolating switch (cooker socket) with at least 3mm contact separation. The cable must have conductors of sufficiently high cross-sectional area to prevent overheating and deterioration.

Six square millimetres (6.00mm²) is the recommended cross-section area.

The cable should be routed away from potentially hot areas marked by X in the diagram below.

To move the cooker, open the main oven door and lift the cooker by holding inside the top of the compartment.

This is a type X appliance which means it is free-standing and can be fitted with cabinets on one or both sides.

Side walls which are above hob level should be protected by heat resistant non-combustible material and MUST NOT be nearer than 40mm to the hob side.

A nominal air gap of 2mm at either side of the cooker is required to enable the cooker to be moved into position. It is recommended that proprietary trims are fitted to protect the worktops of either side of the appliance. These are available from most DIY stores.

Two spacers have been incorporated into the back of the appliance to ensure an air gap of 10mm is maintained at hotplate level. Tiles or other forms of deep wall covering should not obscure this gap.

8

Page 7 Page 9
Page 8
Image 8
Tricity Bendix SI 221 installation instructions Introduction, Rating Plate, Installation
Page 7 Page 9

SI 221 specifications

The Tricity Bendix SI 221 is a standout appliance that embodies convenience and efficiency in modern kitchen settings. Designed to meet the needs of busy households, this cooker is a perfect blend of functionality and style. With its sleek design and user-friendly features, it can seamlessly integrate into any kitchen décor.

One of the primary features of the Tricity Bendix SI 221 is its robust cooking capabilities. It comes equipped with a powerful electric oven, offering a generous capacity that allows users to cook multiple dishes simultaneously. The oven features various cooking modes, including fan-assisted, conventional, and grill options. This versatility ensures that every meal can be prepared to perfection, catering to both traditional and innovative cooking methods.

A notable technology embedded within the SI 221 is its efficient heat distribution system. This ensures consistent cooking results regardless of the dish being prepared. The oven also features a powerful fan that circulates hot air evenly, which significantly reduces cooking times and enhances energy efficiency.

For those concerned about energy consumption, the Tricity Bendix SI 221 scores well with its energy-efficient rating, making it an eco-friendly choice for environmentally conscious consumers. The appliance is designed to minimize energy usage without compromising on performance, leading to substantial energy savings over time.

Moreover, the Tricity Bendix SI 221 boasts an easy-to-clean enamel interior, making maintenance a breeze. The smooth surface prevents food residues from sticking, ensuring that users can wipe down the interior with minimal effort. Additionally, the double-glazed oven door keeps heat locked in while remaining cool to touch on the outside, enhancing safety and efficiency.

The control panel is intuitive, featuring a digital display that allows for precise temperature adjustments and cooking times. This simplifies the cooking process, making it suitable for both novice cooks and culinary enthusiasts.

Furthermore, the design of SI 221 includes safety features such as an automatic shut-off function, providing users with peace of mind during cooking sessions.

With its combination of advanced technology, energy efficiency, and user-friendly features, the Tricity Bendix SI 221 stands out as an excellent choice for anyone looking to elevate their cooking experience. Its stylish design and practical functionalities make it an ideal addition to any contemporary kitchen.
Top Page Image Contents