INTRODUCTION

WARNING: THIS APPLIANCE MUST BE EARTHED

RATING PLATE

Record the model, product and serial numbers on the back cover of this instruction book, from the rating plate. This is situated on the base of the appliance on the front right hand side.

The appliance must be protected by a suitably rated fuse or circuit breaker. The rating of the appliance is given on the rating plate.

Do not remove the rating plate from the cooker as this may invalidate the guarantee.

INSTALLATION

If your cooker has been damaged in transit, contact your supplier immediately. DO NOT attempt to install it.

Your cooker left the factory fully packaged to protect it from damage. If it is delivered without packaging and damage has occurred, the manufacturer cannot accept responsibility. Contact your supplier for advice.

Once the packaging has been removed the cooker should only be moved by hand. DO NOT use a sack barrow or any other aid to lift the cooker as damage may occur.

Connection to the electricity supply must be carried out by a qualified electrician/competent person.

The electrical connection should be made using a double pole isolating switch (cooker socket) with at least 3mm contact separation. The cable must have conductors of sufficiently high cross-sectional area to prevent overheating and deterioration.

Six square millimetres (6.00mm²) is the recommended cross-section area.

The cable should be routed away from potentially hot areas marked by X in the diagram below.

To move the cooker, open the main oven door and lift the cooker by holding inside the top of the compartment.

This is a type X appliance which means it is free-standing and can be fitted with cabinets on one or both sides. It may also be fitted in a corner setting.

Side walls which are above hob level should be protected by heat resistant non-combustible material and MUST NOT be nearer than 40mm to the hob side.

A nominal air gap of 2mm at either side of the cooker is required to enable the cooker to be moved into position. It is recommended that proprietary trims are fitted to protect the worktops of either side of the appliance. These are available from most DIY stores.

Two spacers have been incorporated into the back of the appliance to ensure an air gap of 10mm is maintained at hotplate level. Tiles or other forms of deep wall covering should not obscure this gap.

8

Page 7 Page 9
Page 8
Image 8
Tricity Bendix SI 251 installation instructions Introduction, Rating Plate, Installation
Page 7 Page 9

SI 251 specifications

The Tricity Bendix SI 251 is a modern appliance that represents the epitome of contemporary kitchen design and functionality. This sleek and stylish oven is engineered to provide an exceptional cooking experience, making it a popular choice among households looking for reliability and innovation.

One of the standout features of the Tricity Bendix SI 251 is its impressive multi-functional cooking capabilities. It offers a variety of cooking programs, including convection baking, grill, and defrost settings, allowing users to prepare a wide range of dishes with utmost precision. The convection cooking feature is particularly noteworthy, as it ensures even heat distribution throughout the oven cavity, resulting in perfectly baked goods and evenly cooked meals.

In terms of design, the SI 251 boasts an elegant and modern aesthetic that can seamlessly integrate into any kitchen decor. The stainless steel finish not only enhances its visual appeal but also ensures durability and resistance to scratches and fingerprints. The sleek glass door provides a clear view of the cooking process while adding a touch of sophistication to the overall look.

Another key characteristic of the Tricity Bendix SI 251 is its user-friendly control panel. Equipped with intuitive dials and a digital display, the oven allows for easy temperature and time adjustments. The control panel also features pre-set cooking programs, making it simple for users to select their desired settings without any hassle.

Safety is also a prime concern in the design of the Tricity Bendix SI 251. The appliance is equipped with multiple safety features, including a child lock and an automatic shut-off function, providing peace of mind for busy households.

In terms of energy efficiency, the SI 251 is designed to consume less power without compromising on performance. This not only leads to cost savings on energy bills but also contributes to a more sustainable lifestyle.

Overall, the Tricity Bendix SI 251 is a brilliant blend of functionality and style. With its versatile cooking features, user-friendly controls, and modern design, it stands out as an excellent addition to any kitchen, catering to the needs of both amateur cooks and seasoned chefs alike. Its commitment to safety and energy efficiency further enhances its appeal, making it a trusted choice for families who value innovation in cooking appliances.
Top Page Image Contents