Tricity Bendix TBD903 installation instructions To Set The Timer To Switch Off Only

B)To Set The Timer To Switch Off Only

i)Ensure the electricity supply is switched ON and that the correct time of day is displayed, e.g. 10.00am as Fig. 9.

ii)Place food in oven.

iii)To set the length of cooking time, press the

cooking hours button ( ) while holding it down, turn the increase control ( + ) until the required length of cooking time is displayed, e.g. 2 hrs 15 mins as Fig. 10. Turn the decrease control (-) if necessary.

iv)Release the buttons. The AUTO display will glow and the time of day will be displayed after 5 seconds.

v)Set the oven temperature.

vi)To check the stop time during the cooking

period, simply press the stop time button

(	) and the stop time will be displayed, as Fig.
11.

4.To Return The Cooker To Manual After An Automatic Programme

To return the cooker to manual operation after an automatic programme, follow the steps given below.

At the end of a timed cooking period, the AUTO light will flash and a bleeper will sound for up to 2 minutes. This can be stopped by pressing any of the buttons as Fig. 12.

Turn oven control to the OFF position. The AUTO display will continue to flash.

Press ( ) button. The AUTO display will go out as Fig.13.

Fig. 9

Fig. 10

Fig. 11

Fig. 12

Fig. 13

17