Cleaning the Oven
Before cleaning always allow the cooling fan to cool the cooker down before switching off at the electricity supply.
The oven should be kept clean at all times. A build- up of fats or other foodstuffs could result in a fire, especially in the grill pan.
Cleaning materials
Oven Cavity
The enamelled base of the oven cavity is best cleaned whilst the oven is still warm.
Wipe the oven over with a soft cloth soaked in warm soapy water after each use. From time to time it will be necessary to do a more thorough cleaning, using a proprietary oven cleaner.
Before using any cleaning materials on your oven, check that they are suitable and that their use is recommended by the manufacturer.
Cleaners that contain bleach should NOT be used as they may dull the surface finishes. Harsh abrasives should also be avoided.
External cleaning
Regularly wipe over the control panel, oven door and door seal using a soft cloth well wrung out in warm water to which a little liquid detergent has been added.
To prevent damaging or weakening the door glass panels avoid the use of the following:
•Household detergent and bleaches
•Impregnated pads unsuitable for
•Brillo/Ajax pads or steel wool pads
•Chemical oven pads or aerosols
•Rust removers
•Bath/Sink stain removers
Clean the outer and inner door glass using warm soapy water. Should the inner door glass become heavily soiled it is recommended that a cleaning product such as Hob Brite is used.
DO NOT clean the oven door while the glass panels are warm. If this precaution is not observed the glass panel may shatter. If the door glass panel becomes chipped or has deep scratches, the glass will be weakened and must be replaced to prevent the possibility of the panel shattering. Contact your local Service Force Centre who will be pleased to advisefurther.
Replacing The Oven Light
Disconnect the appliance
If the oven bulb needs replacing, it must comply with the following specifications:
- | Electric power: | 15W, |
- | Electric rate: |
-Resistant to temperatures of 300°C,
-Connection type: E14.
These bulbs are available from your local Service Force Centre. To replace the faulty bulb:
1.Ensure the oven is isolated from the electrical supply.
2.Push in and turn the glass cover anticlockwise.
3.Remove the faulty bulb and replace with the new one.
4.Refit the glass cover and restore the electrical supply.
FO 0287
11
