Trion FM 1000M manual FM 1000 ELECTRONIC / MEDIA AIR CLEANERS, FM 1000E

FM 1000 ELECTRONIC / MEDIA AIR CLEANERS

6-Way

Air Discharge

Aluminum Mesh

Pre-Filter

3-Speed

Switch

FM 1000E

Ionizer-

Collector

or

FM 1000M

Media Filter

Removable

Filter Access

Door

FM 1000E

The Trion FM 1000E utilizes the principle of “electrostatic precipitation.” Dirty air is drawn into the center intake by the motor/blower, and is moved through the washable, alu- minum mesh pre-filter where lint and large dust particles are trapped. The remaining particles, some as small as .01 micron, pass into a strong electrical field (ionizing section) where each particulate receives an electrical charge. These charged particles then pass into a collector plate section made up of a series of equally-spaced parallel plates. Each alternate plate is charged with the same polarity as the particles, which are repelled, while the interleaving plates are grounded, and attract and collect the particles. Clean air is then discharged in six directions back into the area.

FM 1000M

The Trion FM 1000M utilizes a principle called “interception filtration.” In the first stage of this two-stage process, dirty, polluted air is drawn into the center intake by the motor/blower and is moved through the washable, aluminum mesh pre-filter to remove lint and larger dust particles. In the second stage, the micro-glass deep pocket media filter strips smoke and other submicron particles from the air stream by interception. The small diameter fibers in the filter intercept and retain these small particles while the large surface area of the filter provides long life and low pressure drop. Clean air is then discharged in six directions back into the area. The quiet blower is designed specifically to handle the two-stage filtration system at rated CFM (m3/hr) over the useful life of the filter.