Unit Diagram
Air Bear Supreme 2000 (20” x 25” x 5”)
Air Bear Supreme 1400 (16” x 25” x 5”)
Air Bear Supreme 1400 (20” x 20” x 5”)
2
1
3
1.Cabinet
2.Filter Cartridge
3.Access Door
Capacity Selection Guide
|
|
|
| Air Bear Supreme |
| Air Bear Supreme | Air Bear Supreme |
|
|
|
|
|
|
|
|
| Model |
|
| 1400 (20” x 20”) |
| 1400 (16” x 25”) | 2000 (20” x 25”) |
| Air flow (CFM) |
|
| Resistance (Inches W.G.) |
| ||
|
|
|
|
|
|
|
|
| 600 |
|
| .04 |
| .04 | .03 |
| 800 |
|
| .08 |
| .08 | .05 |
| 1000 |
|
| .12 |
| .12 | .07 |
| 1200 |
|
| .18 |
| .18 | .10 |
| 1400 |
|
| .24 |
| .24 | .14 |
|
|
|
|
|
|
|
|
| 1600 |
|
| . |
| . | .18 |
| 1800 |
|
| . |
| . | .22 |
| 2000 |
|
| . |
| . | .27 |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Installation
Physical Installation
The air cleaner cannot be installed with the access door facing down. The section entitled Typical Mounting Positions (pg.4) shows examples of proper air cleaner mounting with a variety of furnace installations.
Prior to Installing this Product
1.Read rules and instructions carefully for safe operation. Failure to follow them could damage the product or cause a hazardous condition.
2.Check the ratings given on the product to make sure it is suitable for your application.
3.Remove the old furnace filter and discard.
4.The air cleaner cannot remove existing dirt from the blower and ducts. Clean the area thoroughly before beginning installation.
NOTE:
The following is a typical installation of the air cleaner on a highboy furnace. You may have to alter the installation to fit your specific application.
5.Locate the cabinet in the cold air return duct such that all of the return air flows through the unit. If the furnace and air cleaner openings are different, use a transition.
6.Mounting holes are provided in the air cleaner cabinet for ductwork attachment. The .140” diameter holes are sized for #8 sheet metal screws, or 1/8” rivets. If the adjoining ductwork is flanged, install the screws with the screw heads inside the cabinet, to prevent damage to the filter cartridge during removal and installation.
7.Remove the plastic bag from the filter cartridge and replace filter cartridge in cabinet.
8.After the unit has been secured, seal seams air tight with duct tape or caulking. Reinstall access door to ensure a tight seal.
2 | 7 |
|
