Basic Operation continued | Tripp Lite 2-9USTAND guide

Image 9

Tripp Lite 2-9USTAND owner manual Basic Operation continued

Contents

Installation Important Safety InstructionsTroubleshooting Battery Replacement SAVE THESE INSTRUCTIONS Battery WarningsUPS Location Warnings UPS Connection Warnings Mounting Rack 4-Post Mounting Installation continued 2-Post Telecom MountingMounting Tower 1 Plug your UPS’s line cord into an electrical outlet InstallationImporant continuedSafety Instructions2 Plug your equipment into your UPS 3 Turn your UPS ON 2 USB and RS-232 Serial 4 External Battery ConnectionCommunications all models 3 EPO Port Connection all models Alarm Silence UPS Power ONUPS Self-Test UPS Cold Start Front Panel Indicator Lights continued Basic Operation continued External Battery Pack Connector configuration varies by model Use to connect optional Tripp Lite Battery Packs for additional runtime. Contact Tripp Lite Customer Support at 773 869-1234 for the appropriate Tripp Lite battery pack to connect. Refer to instructions available with the Battery Pack for complete connection information and safety warnings Rear Panel continued Communicationsapplications Troubleshooting This indicates that utility power is too high Troubleshooting continuedadequate space for air to circulate near or low for the UPS to operate in BYPASS 1 Remove Front Panel 2 Disconnect Batteries Procedure3 Remove/Dispose of Batteries 4 Add Batteries 5 Connect Batteries 6 Replace Front Panel Storage Service 1111 W. 35th Street, Chicago, IL 60609 USA 773.869.1234 USA 773.869.1212 International200811139 93-2471EN