Tripp Lite 93-2642 owner manual Feature Identification

Feature Identification

Identify the premium features on your specific model and quickly locate instructions on how to maximize their use.

1 Configuration DIP Switches: optimize Inverter/Charger operation depending on your application. See Configuration section for setting instructions.

2Operating Mode Switch: controls Inverter/Charger operation. The “AUTO/REMOTE” setting ensures your equipment receives constant, uninterrupted AC power. It also enables the Inverter/Charger to be remotely monitored and controlled with an optional remote module (Tripp Lite model APSRM4, sold separately). The “CHARGE ONLY” setting allows your batteries to return to full charge faster by turning the inverter off which halts battery discharging. See Operation section for setting instructions.*

3“LINE”, “INVERT”, “LOAD” LEDs: intuitive “traffic light” signals show whether the Inverter/Charger is operating from AC line power or DC battery power. It also warns you if the connected equipment load is too high. See Operation section for instructions on reading the indicator lights.

4"BATT VOLTAGE" LEDs: these three lights will turn ON in several sequences to show approximate battery level. See Operation section for instructions on reading the indicator lights.

5DC Power Terminals: connect to your battery terminals. See Battery Connection section for instructions.

6Hardwire AC Input/Output Terminals: securely connect the Inverter/Charger to vehicle or facility electrical system input and recommended GFCI protected output. See AC Input/Output Connection section for instructions.

7Resettable Circuit Breaker: protect your Inverter/Charger against damage due to charger failure. See Operation section for resetting instructions.

8Remote Control Module Connector: allows remote monitoring and control with an optional module (Tripp Lite model APSRM4, sold separately). See remote module owner’s manual for connection instructions.

9Battery Charge Conserver (Load Sense) Dial: conserves battery power by setting the low-load level at which the Inverter/Charger’s inverter automatically shuts off. See Configuration section for setting instructions.

10Main Ground Lug: properly grounds the Inverter/Charger to vehicle grounding system or to earth ground. See Configuration section for instructions.

11Multi-Speed Cooling Fan: quiet, efficient fan prolongs equipment service life.

12Hardwire AC Input/Output Cover Plate

13Battery Temperature Sensing Connector: prolongs battery life by adjusting charge based on battery temperature. Use with cable (included on select models). See Configuration section for details.

14Automatic Generator Start Connector: automatically cycles generator based on battery voltage. Use with user-supplied cable. See Configuration section for details.

15Ignition Switch Control Jack: use to connect the Inverter to your vehicle's ignition switch (with user supplied cable) in order to automatically control the Inverter with the vehicle's ignition switch. See Operation section.

* OFF - De-energizes unit and AC output on most models.

DC OFF - De-energizes unit and connects AC OUT to AC IN on select models.

11 1 4 8 3 2 9

13Side Mounted, Not Shown

14	Side Mounted,
	Not Shown	10
15	Side Mounted,
	Not Shown

7

	“FOR USE WITH COPPER WIRE ONLY”
	HOT IN
	NEUTRAL	IN
	GROUND	IN
	GROUND	OUT
	HOT OUT
	NEUTRAL	OUT
5	6	12
Front View		Rear View

3R