Tripp Lite APS2424INT, APS2012INT, APS1024INT owner manual Specifications-Corded Models, Inverter

Specifications—Corded Models

CORDED MODELS:	APS 912 INT	APS 1024 INT
Weight:	11.9Kg	11.9Kg
INVERTER
Continuous power (@ 20° C):	900W	1000W
Surge power (5 seconds):	1800W	2000W
Efficiency (Full Load):	89%	89%
Minimum DC Fuse Rating:	170A	90A
DC Input Current @ Nominal V DC
Full Load :	85A	47A
No Load :	2.6A*	1.5A*
Nominal DC Input:	12 VDC	24 VDC
DC Input Voltage Range:	10-15 VDC	20-30 VDC
Nominal Output Volts:	230 VAC ± 5%	230 VAC ± 5%
Nominal Output Frequency:	50 Hz	50 Hz
BATTERY CHARGER
Charging Capacity DC:	30A	15A
Acceptance Volts DC:	Selectable	Selectable:
	14.4V/14.2VWet/Gel	28.8V/28.4VWet/Gel
Float Volts VDC:	13.3V Wet/13.6V Gel	26.6V Wet/27.2V Gel
Input Voltage AC:	230V	230V
Input Current AC:	4.3A	4.3A
LINE VAC OPERATION
Minimum Input AC Volts:	Selectable:	Selectable:
	144**, 163, 182, or 201VAC	144**, 163, 182, or 201VAC
Maximum Input AC Volts:	Selectable: 259** or 264 VAC	Selectable: 259** or 264 VAC
Maximum Input Current
(Continuous, Charger at Maximum):	8.3A	8.8A
Input Frequency:	45-55 Hz	45-55 Hz
Maximum Output AC (Continuous):	3.9A	4.3A
Automatic Transfer Time:	4-6 ms	4-6 ms

*Load sense can reduce this to 1/30 of the listed current. **Factory default setting. ***When AVR is boosting incoming current.

14

9906058 230V APS MV-cabinet--English.p65 14 3/21/00, 4:29 PM