Operation (continued)

Keyboard Hot Keys

User-definable hotkeys for PC selection:

Hot key sequence = Ctrl - Alt - [command key]*

* Please refer to the next section for keys that are qualified to be used as a command key.

•Note that these three keys should be pressed and held together. And it is upon the release of all three keys that the switching action will be executed.

Universal hot key for switching to next port:

Universal hot key sequence = ScrLk + ScrLk

*For other operating systems on PC such as Linux, you can still use this special hot key to facilitate PC switching. This special hot key is not available for Mac.

•Both the universal hot key, ScrLk + ScrLk and the user-definable hot key, Ctrl - Alt - [command key] WILL NOT allow you to switch to an empty port that is not connected with any computer. To force your KVM to switch to an empty port, just press the face-panel button to switch.

•Each keystroke within a hot key sequence should be pressed within 2 seconds. Otherwise, the hot key sequence will not be validated.

•After port switching, you have to wait until the KVM Switcher icon shows forth the target port before you can perform next switching again.

•All the hot keys are only functional after your PCs are booting into the OS. If you want to switch PC in the BIOS/pre-boot stage, press the face-panel button to switch.

KVM Switcher Software (only for Windows platform)

In addition to PC switching, the KVM Switcher Software also allows you more advanced functions such as described in the next section.

KVM Switching Operation Reference

Switching PCs by Operation Menu

Right-click the KVM Switcher icon to evoke

Windows

Mac OS

the operation menu, then select whichever PC

 

 

is available for switching. Once you select

 

 

a PC channel, it will immediately switch to

 

 

that PC. Note that the unconnected port(s) or

 

 

the active port will be grayed-out and hence

 

 

non-selectable.

 

 

KVM Switching Operation Reference (continued)

Switching PCs by Keyboard Hot keys

Hit the hot key according to your current hot key definition:

Hot key sequence = Ctrl - Alt - [command key]*

*The factory default hot key setting is Ctrl + Alt + 1/2 for PC 1/2. You can also use ScrLk + ScrLk to switch PC.

Start Auto-Scan

Right-click the KVM Switcher icon to evoke the operation menu, then select Start Auto-Scan to activate auto-scanning.

Stop Auto-Scan

(While auto-scanning) Right-click the KVM Switcher icon to evoke the operation menu, then select Stop Auto-Scan to de-activate auto-scanning. Or you can press any button on the face-panel to stop Auto-scan.

Auto-Scan Period

Select the Auto-scan period from 10 ~ 60 seconds with an increment of 5 seconds. The Auto- scan period is the time your KVM Switch will wait before switching to the next PC.

KVM Switcher Configuration

Right-click the KVM Switcher icon and select Settings or double-click the icon to bring up the configuration dialog box.

Define Hot Key Commands

You can specify the command key as you like by typing it in. For example, you can specify the hot key for switching to PC 1 as CTRL - ALT - A by typing an A (not case-sensitive) in the editable field.

Hot Key Sequence = CTRL - ALT - [command key]*

* The command key is user-definable via the configuration dialog box.

•Please note that if you intend to modify the command key, you have to modify them on each and every one of the connected computers, since the hot key setting is stored within each connected computer.

•Except those control keys such as Alt, Ctrl, Shift, CAPS, Tab, Esc and those functions keys and edit keys, all other keys on the keyboard, including those number keys on the number pad, are all keys qualified to be used as hot key command keys. In addition to the software KVM Switching by the operation menu and the user-defined hot keys, you can always use the universal hot key for PC switching – ScrLk + ScrLk

Fix Audio Port to One PC

Check this option and then select the PC to fix the audio/mic channel to the selected PC. Once this option is checked, the audio/mic channel will be fixed and become non-switchable.

4

 

5

Page 2 Page 4
Page 3
Image 3
Tripp Lite B004-DUA2-K-R owner manual KVM Switching Operation Reference
Page 2 Page 4

B004-DUA2-K-R specifications

The Tripp Lite B004-DUA2-K-R is a highly versatile 2-port USB KVM switch that streamlines the management of multiple computers through a single keyboard, video monitor, and mouse setup. This device is an ideal solution for users who require efficient control over two separate systems, enabling seamless toggling between them with minimal effort.

One of the standout features of the B004-DUA2-K-R is its dual-link DVI video support, which ensures high-definition video output quality up to 1920x1200 resolutions. This feature is particularly beneficial for graphic designers, gamers, or any professional requiring superior visual fidelity. The KVM switch supports both USB 1.1 and USB 2.0, allowing for the connection of a wide range of peripherals while providing excellent compatibility with various operating systems, including Windows, Mac, and Linux.

The B004-DUA2-K-R employs advanced technology such as EDID emulation, which maintains the quality of the video display by ensuring that the correct resolution and refresh rate settings are maintained even when switching between computers. This technology also enables quick switching, reducing downtime when accessing different systems.

Moreover, the KVM switch offers convenience through its plug-and-play functionality, eliminating the need for additional software installation or complex setup procedures. Users can simply connect their devices and begin using them right away, making it perfect for both home and office environments.

Another significant characteristic is the built-in USB hub functionality, which allows for the connection of multiple USB devices, such as printers and external drives. This feature enhances productivity by allowing users to share peripherals between the two computers easily.

The compact and sturdy design of the B004-DUA2-K-R ensures durability, making it a reliable choice for long-term use. Additionally, it comes with a remote push-button for easy switching between computers, further enhancing user convenience.

In summary, the Tripp Lite B004-DUA2-K-R 2-port USB KVM switch is a powerful and user-friendly solution that provides high-quality video output, extensive peripheral support, and easy management of multiple systems. Whether for professional or personal use, it is an excellent tool for maximizing efficiency in a multi-computer environment.
Top Page Image Contents