2. Installation
2.4Multiple Station
3.Use a KVM cable kit (described in the Cables section, page 2) to connect the keyboard, video and mouse ports of a computer to any available port on the KVM switch. The distance between the KVM switch and each connected computer must not exceed 33 ft (10 m).
4.Repeat the above steps for any additional KVM switches you wish to add to the chain.
5.Power up the installation according to the following procedure:
a. Plug in the power adapter for the first station. Wait a few seconds to allow the unit to determine its Station ID.
b. Plug in the power adapters for each subsequent station in the installation in turn (ie. second station, then third station, etc.). Each KVM switch has an LED display on its front panel to indicate its Station ID (the Station ID for the first station is 01, the ID for the second station is 02, the ID for the third station is 03, etc.).
In each case, wait for the Station ID to be displayed on the Station ID LED before plugging in the next station.
2.5Multiple Station (Cascaded) Installation
The
5
201005078 | 5/17/2010 4:35:48 PM |