Installation
Notes:
1.Test to make sure the entire installation works properly before pulling cables through ceilings/walls.
2.The B122-000-60 has been designed for use with Tripp Lite P568-Series HDMI cables. To ensure maximum distance and performance, it is recommended that you use Tripp Lite P568-Series HDMI cabling.
HDMI ACTIVE EXTENDER
Model: B122-000-60
BLU-RAY
1Connect the longer HDMI cable between the source and the INPUT port on the B122-000-60.
Note: When transmitting a 1080p (60Hz) signal with 12-bit deep color, the HDMI cable connecting the source to the B122-000-60 must be no longer than 150 ft. When transmitting a 1080i (60Hz) signal with 12-bit deep color, the HDMI cable connecting the source to the B122-000-60 must be no longer than 200 ft.
2Connect the shorter HDMI cable between the HDMI monitor and the OUTPUT port on the B122-000-60. Note: The HDMI cable used to connect the monitor to the B122-000-60 must be no longer than 16 ft. (5 m.).
3Connect the external power supply to the B122-000-60, and plug it into a Tripp Lite Surge Suppressor, Power Distribution Unit (PDU) or Uninterruptible Power Supply (UPS).
4If necessary, use the equalization control to adjust the video image.
2
201011070 93-3074.indd 2 | 11/19/2010 2:21:04 PM |
