5
2b. Mount on Solid Brick and Concrete Block Find and mark the
exact location of
mounting holes
Screw the wall
plate onto the
wall
Drill pilot holes
11
2
WARNING
• When installing wall mounts on cinder block, verify the actual concrete thickness
is at least 1-3/8” (35mm) for using the concrete anchors. Do not drill into mortar
joints! Be sure to mount in a solid part of the block, generally 1” (25mm) minimum
from the side of the block. It is suggested an electric drill on a slow setting be used
to drill the hole instead of a hammer drill to avoid breaking out the back of the hole
when entering a void or cavity.
• Installers must verify that the supporting surface will safely support the combined
load of the equipment and all attached hardware and components.
Concrete Anchor
D6 Washer
Anchor Bolt
13-09-231-9332A1-EN.indd 5 10/31/2013 11:50:18 AM