Tripp Lite SMART700SER warranty Specifications

PowerAlert Software and DB9 serial communications port enable remote monitoring of UPS status and site power conditions; safe unattended shutdown without data loss during extended power failures; messaging of UPS and line power status: on-battery, low-battery, power-restored, AC line voltage, DC battery voltage and battery capacity

Communications ports support timed inverter shutoff after unattended shutdown, activate self-test and 10 second reboot of connected equipment

PowerAlert UPS monitoring and unattended shutdown software with complete cabling included

Battery replacement door

Notification of system status via 5 LEDs and multi-function audible alarms

Wall mountable with user-supplied UPSWM wallmount bracket

Cold start capability enables UPS turn-on in battery mode during blackout conditions

2 year manufacturer's product warranty $250,000 Ultimate Lifetime Insurance

Specifications

SYSTEM OVERVIEW

Voltage	120V AC
compatibility
Frequency	60Hz
compatibility
OUTPUT
Output VA	700
Output watts	450
Output nominal	120V AC
voltage
Output voltage	LINE MODE: Sine wave line voltage 120V (-18% / +8%), BATTERY MODE: PWM sine wave output 120V +/-5%
regulation
Output frequency	LINE MODE: Passes line frequency of 60Hz +/-10% BATTERY MODE: Inverter output regulated to 60Hz +/-0.5Hz
regulation
Outlet quantity /	6 NEMA 5-15R
type
Overload	Via 10A input circuit breaker
protection
INPUT
Maximum input	4.33A / 520 watts
amps
Input connection	NEMA 5-15P
type
Input cord length	7 ft., 16 gauge
Recommended	15A 120V
Electrical Service
BATTERY
Full load runtime	6 minutes (700VA)
Half load runtime	20 minutes (350VA)
DC system voltage	12 VDC
Typical battery	3-6 years, depending on usage
lifespan
Battery recharge	2-4 hours to 90%
rate
Replacement	RBC52 (quantity 2)
Battery Cartridge

VOLTAGE REGULATION