Tripp Lite SMX1000RT2U warranty Battery, Voltage Regulation, Leds Alarms & Switches, Physical

Rated input current (at maximum load)

Nominal Input Voltage(s) Supported

UPS input connection type

UPS input connection description

Input circuit breaker

BATTERY

3.4A

230V AC

C14 inlet

C14 inlet accepts user-supplied AC power cord with country specific plug.

10A

Full load runtime (minutes)

Half load runtime (minutes)

DC system voltage (VDC)

Battery recharge rate (included batteries)

Replacement battery cartridge (internal UPS battery replacement)

9 min. (700w)

21 min. (350w)

24

4.5hours from 10% to 90%

RBC92-2U

Battery Access

Battery replacement description

VOLTAGE REGULATION

Front panel battery access door

Hot-swappable, user replaceable batteries

Voltage regulation description

Overvoltage correction

Undervoltage correction

Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 159 to 282

Input voltages between 245 and 282 are reduced by 12%

Input voltages between 159 and 199 are boosted by 14%

LEDS ALARMS & SWITCHES

LED Indicators

Alarms

Alarm cancel operation

Switches

5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status

Audible alarm indicates power-failure, overload and low-battery conditions

Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status

2 Switches control off/on power status and alarm-cancel/self-test operation

SURGE / NOISE SUPPRESSION

UPS AC suppression joule rating

UPS AC suppression response time

EMI / RFI AC noise suppression

PHYSICAL

480

Instantaneous

Yes

Installation form factors supported with included accessories

4 post 19 inch rackmount (mounting rail kit included)