Unpacking Instructions (continued)
3Remove foam corner protectors.
5Remove two brackets attaching enclosure to pallet. Save brackets to either permanently mount enclosure to floor in final installation or for use in repacking the enclosure.
X2 |
4Remove plastic wrap, being careful not to scratch enclosure. Save bag with enclosure owner’s manual and other literature.
Attach ramps to pallet. Insert ramp mounting tabs into mounting
6grove on pallet. Position ramps so they are aligned with the enclosure’s wheels. For added safety, Tripp Lite recommends that you secure the ramps to the pallet with
SIDE VIEW |
DANGER! Ensure the ramps are secured to the pallet and aligned with the enclosure wheels before rolling the enclosure off the pallet. If ramps are not properly secured or aligned, they may collapse, causing potential product damage and serious injury.
NOTE! For convenience, mounting grooves are located on both the front and rear of pallet. To ease unloading, ensure the ramps are attached to the side of the pallet where the enclosure has the least weight.
7Using multiple assistants, carefully roll enclosure down ramps.
Repacking Instructions
Follow unpacking instructions in reverse order.
WARRANTY REGISTRATION
Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
1111 W. 35th Street Chicago, IL 60609 USA (773)
Tripp Lite follows a policy of continuous improvement. Product specifications are subject to change without notice.
200704103