Assembly Instructions
SRFANWM
Wall-Mount Enclosure Cooling Solution
Alternative Installation
Fans mounted outside the
1
1For external installation, begin by installing the fan into the shroud using the supplied hardware.
2
2Mount the assembly over the vents on the exterior of the
3
3Secure the wire between each fan to the cabinet using the
4
4Plug the SRFANWM input cable into a power source, such as an external source. For connection to an internal PDU, utilize the removable cable access panel.
SAVE THESE
INSTRUCTIONS
This manual contains instructions and warnings that must be followed during the installation and operation of the product described in this manual. Read all instructions and warnings thoroughly before attempting installation. Failure to comply may affect the warranty and cause property damage and personal injury.
•Install in a controlled indoor environment, away from moisture, temperature extremes, flammable liquids and gasses, conductive contaminants, dust and direct sunlight.
•Inspect the shipping container and the unit for shipping damage. Do not use the unit if it is damaged.
•Connect the unit to an outlet that is provided with appropriate overcurrent protection.
•When using tools, use eye protection and follow all other safety precautions recommended by the tool manufacturer and required by applicable regulations.
•Keep hair, clothing and loose objects away from the fan intakes. There is a risk of property damage and personal injury.
•Do not block, cover or insert objects into the openings of the unit.
•Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.
1111 W. 35th Street • Chicago, IL 60609 USA
www.tripplite.com/support
© 2011 Tripp Lite. All rights reserved.
201105092
