Tripp Lite SU1000RTXL2UA warranty Input, Battery, Voltage Regulation, Leds Alarms & Switches

Outlet quantity / type

Customized load management receptacles

6 NEMA 5-15R

2 single outlet controllable load banks support load shedding and remote reboot on demand of locked network devices.

Overload	15A input breaker
protection
INPUT
Maximum input	8.6A
amps
Input connection	NEMA 5-15P
type
Input cord length	10 ft. 14 gauge
Recommended	15A 120V
Electrical Service
BATTERY
Full load runtime	4.5 minutes with internal batteries (800 watts)
Half load runtime	14 minutes with internal batteries (400 watts)
Expandable	Supports extended runtime with optional external battery packs BP24V15RT2U (limit 1), BP24V28-2U (limit 1) and
battery runtime	BP24V70-3U (multi-pack compatible)
DC system voltage	24VDC
Typical battery	3-6 years, depending on usage
lifespan
Battery recharge	Less than 6 hours to 80%
rate
Replacement	RBC92-2U
Battery Cartridge

VOLTAGE REGULATION

Voltage regulation description

Overvoltage correction

Brownout correction

On-line, double-conversion power conditioning maintains output within 2% of 100/110/120 volts at all times

Maintains output of selected nominal +/-2% during overvoltages to 138V AC

Maintains output of selected nominal +/-2% during undervoltages to 65V AC (at loads greater than 70% undervoltage correction extends to 80V)

LEDS ALARMS & SWITCHES

Front panel LEDs

LED STATUS DISPLAY: line power (green), online (green), bypass (yellow), on battery (green), overload (red), battery low (yellow) - 4 LED LOAD / BATTERY LEVEL DISPLAY (100%, 75%, 50%, 25%). LED display panel easily rotates for better viewing in rackmount or tower configurations.

Alarms

Multi-function audible alarm with distinctive ring patterns offer notification of backup operation (2 seconds on / 0.5 seconds off), low battery warning (1.25 seconds on / 0.5 seconds off), overload (sounds continuously), UPS fault (4.2 seconds on / 1 second off), input voltage out of frequency (2.1 seconds on / 0.14 seconds off) and high input voltage (2.1 seconds on 0.07 seconds off)

Switches

Includes power off/on switch to enable system turn on (press ON switch), UPS battery test (press ON switch during normal AC operation), buzzer silence (press ON switch during battery operation) and OFF (press OFF switch) - all switch functions require that the switch be pressed and held for longer than 2 seconds, but less than 4 seconds

SURGE / NOISE SUPPRESSION

AC surge suppression

AC suppression response time

Dataline suppression

480joules

Instantaneous

Set of 8 wire RJ style interface jacks offer surge suppression for network ethernet or TEL/DSL connection. Pins 1,2,3 and 6 offer ethernet protection starting at 7.5V and the center two wires, pins 4 & 5, offer TEL/DSL line suppression starting at 260V