Tripp Lite SU1500RTXL2UA Input, Battery, Voltage Regulation, Leds Alarms & Switches, Physical

Customized load	2 controllable load banks support load shedding and remote reboot on demand of locked network devices (bankone has 2
management	outlets, bank two has 4 outlets)
receptacles
Overload	20A input breaker
protection
INPUT
Maximum input	12A
amps
Input connection	NEMA 5-15P
type
Input cord length	10 ft./3m
Recommended	120V 15A
Electrical Service
BATTERY
Full load runtime	5 min. with internal batteries (1200W)
Half load runtime	14 min. with internal batteries (600W)
Expandable	Supports extended runtime with optional external battery pack BP48V24-2U (limit 1) and BP48V60RT-3U (multi-pack
battery runtime	compatible)
DC system voltage	48VDC
Typical battery	3-6 years, depending on usage
lifespan
Battery recharge	Less than 5 hours to 90%
rate
Replacement	RBC94-2U
Battery Cartridge

VOLTAGE REGULATION

Voltage regulation description

Overvoltage correction

Brownout correction

On-line, double-conversion power conditioning maintains output within 2% of 100/110/120 volts at all times

Maintains output of selected nominal +/-2% during overvoltages to 138V AC

Maintains output of selected nominal +/-2% during undervoltages to 65V AC (at loads greater than 70% undervoltage correction extends to 80V)

LEDS ALARMS & SWITCHES

Front panel LEDs

LED STATUS DISPLAY: line power (green), on-line (green), bypass (yellow), on battery (green), overload (red), battery low (yellow) - 4 LED LOAD / BATTERY LEVEL DISPLAY (100%, 75%, 50%, 25%). LED display panel easily rotates for better viewing in rackmount or tower configurations.

Alarms

Multi-function audible alarm with distinctive ring patterns offer notification of backup operation (2 seconds on/0.5 seconds off), low battery warning (1.25 seconds on/0.5 seconds off), overload (sounds continuously), UPS fault (4.2 seconds on / 1 second off), input voltage out of frequency (2.1 seconds on/0.14 seconds off) and high input voltage (2.1 seconds on/0.07 seconds off)

Switches

Includes power off/on switch to enable system turn on (press ON switch), UPS battery test (press ON switch during normal AC operation), buzzer silence (press ON switch during battery operation) and OFF (press OFF switch) - all switch functions require that the switch be pressed and held for longer than 2 seconds, but less than 4 seconds

SURGE / NOISE SUPPRESSION

AC surge suppression

AC suppression response time

Dataline suppression

EMI / RFI AC noise suppression

PHYSICAL

480joules

Instantaneous

Set of 8-wire RJ style interface jacks offer surge suppression for network ethernet or TEL/DSL connection. Pins 1,2,3 and 6 offer ethernet protection starting at 7.5V and the center two wires, pins 4 & 5, offer TEL/DSL line suppression starting at 260V

Yes