Tripp Lite SU1500XL warranty Specifications, System Overview, Output, Input, Battery

Maintains continuous operation through blackouts, brownouts, voltage fluctuations and surges with zero transfer time

Removes harmonic distortion, electrical impulses, frequency variations and other hard-to-solve power problems

Accepts input voltages between 80V and 138V (65V to 138V at loads under 70%), regulating output to 120V AC +/-2%

1500VA/1200W output capacity with 6 NEMA 5-15R outlets

Two built-in, individually switchable load banks, each with 3 outlets, can be controlled via software interface to selectively reboot remote equipment or automatically shed less critical loads to extend battery runtime for the most critical equipment

Standard internal battery set provides 14 min. runtime at half load and 4.5 min. at full load

Runtime is expandable with BP48V24-2U (limit 1) or BP48V60RT3U (multi-pack compatible) external battery packs

Attractive all-black upright tower format

Simultaneous communications via HID-compliant USB port, DB9 serial port, and SNMP/web card slot

HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X

DB9 serial network interface supports RS-232 and contact closure messaging

Slot for optional SNMP/web card (part# SNMPWEBCARD)

Included PowerAlert UPS Power Management Software and cabling provides monitoring of in-depth site power conditions, full UPS status and fault warnings, output load level and load bank power control

Compatible with Tripp Lite's WatchDog Service Monitoring/Rebooting Software (part # WATCHDOGSW)

Fault tolerant auto-bypass maintains continuous utility output to connected equipment, even in cases where the UPS is overloaded or suffers an internal failure that requires service

Diagnostic LEDs

Built-in RJ-11 EPO (Emergency Power Off) jack allows connection to site emergency power off systems

$250,000 Ultimate Lifetime Insurance coverage for connected equipment (USA & Canada only) 2-year warranty

Specifications

SYSTEM OVERVIEW

Voltage compatibility	120V (110V, 100V)
Frequency	50/60 Hz compatible
compatibility
OUTPUT
Output VA	1500
Output watts	1200
Output nominal	120V factory default (110, 100V)
voltage
Output voltage	Maintains full-time sine wave output within 2% of 120V, less than 5% total harmonic distortion
regulation
Output frequency	Regulates line frequency to 50/60Hz +/- 0.05Hz
regulation
Outlet quantity / type	6 x NEMA 5-15R
Customized load	2 individually controlled banks, each with 3 outlets, support automated load shedding and remote reboot on demand of
management	locked network devices. Configurable via PowerAlert Software to automatically switch off optional loads to increase
receptacles	available runtime for servers and other critical devices.
Overload protection	20A breaker
INPUT
Maximum input	12A (120V) / 14A (110V) / 15.4A (100V)
amps
Input connection	NEMA 5-15P
type
Input cord length	10 ft.
Recommended	15A 120V
Electrical Service
BATTERY
Full load runtime	4.5 min.

Half load runtime

14 min.