Tripp Lite SU3000RTXL3UHV warranty Specifications, System Overview, Output, Input, Battery

Removes harmonic distortion, electrical impulses, frequency variations and other hard to solve power problems

Accepts input voltages between 160 and 275 (130 to 275 at loads under 70%), regulating output to selectable 200/208/220/230/240V +/-2%

3000VA/2400 watt power capacity with 8 total outlets (6 NEMA6-15/20R & 2 NEMAL6-20R)

Standard internal battery set provides 14 minutes runtime at half load

Expandable runtime with multiple external battery packs (part# BP72V15-2U limit 1/BP72V28-3U multi-pack compatible)

Innovative design makes unit adaptable for rackmount, tower, or stacking applications

Uses only 3 rack spaces (3U) in standard 19 inch rack

DB9 serial port for network interface; SNMP compatible

Slot for optional SNMP/web card (part# SNMPWEBCARD)

PowerAlert unattended shutdown software and 6 ft. network cable included

Compatible with Tripp Lite's Watchdog Service Monitoring/Reboot Software

Fault tolerant auto-bypass maintians continuous utility output to connected equipment, even in cases where the UPS is overloaded or suffers an internal failure that requires service

Diagnostic LEDs

Battery replacement door

Mounting hardware included for 4 post rack enclosures, 2 post telecom rack compatible with separate purchase 2POSTRMKITWM accessory

$250,000 Ultimate Lifetime connected equipment insurance 2 year manufacturer's product warranty

Specifications

SYSTEM OVERVIEW

Voltage	208V AC
compatibility
Frequency	50/60 Hz compatible
compatibility
OUTPUT
Output VA	3000
Output watts	2400
Output nominal	208V AC (200/220/230/240V)
voltage
Output voltage	Maintains full-time sine wave output within 2% of selected nominal voltage, less than 5% total harmonic distortion
regulation
Output frequency	Regulates line frequency to 50/60Hz +/- 0.05Hz
regulation
Outlet quantity /	6 NEMA 6-15/20R, 2 NEMA L6-20R
type
Customized load	2 individually controllable load banks support load shedding and remote reboot on demand of locked network devices.
management	Controllable via PowerAlert software to switch off optional loads, like monitors, to increase available runtime for servers
receptacles	and other critical devices. (Bank A consists of 4 outlets / Bank B consists of 2 outlets)
Overload protection	Via 25A input breaker
INPUT
Maximum input	14.9 / 14.3 / 13.1 / 12.6 / 12.1 Amps (depending on voltage) / 2844 watts
amps
Input connection	NEMA L6-20P
type
Input cord length	10 ft. 14 gauge
Recommended	15A 200-240V
Electrical Service
BATTERY
Full load runtime	Internal batteries — 5 min. (3000VA)

Half load runtime

Internal batteries — 14 min. (1500VA)