Tripp Lite SU3000RTXR3U warranty Input, Battery, Voltage Regulation, Leds Alarms & Switches

Outlet quantity /	4 NEMA 5-15R, 4 NEMA 5-15/20R, 1 NEMA L5-30R
type
Customized load	2 controllable load banks support load shedding and remote reboot on demand of locked network devices (each bank has
management	4 outlets)
receptacles
Overload	Via 40A input breaker
protection
INPUT
Maximum input	24A
amps
Input connection	NEMA L5-30P
type
Input cord length	10 ft / 3 m
Recommended	120V 30A dedicated circuit
Electrical Service
BATTERY
Full load runtime	12 minutes (2400 watts)
Half load runtime	30 minutes (1200 watts)
Expandable	Supports extended runtime with optional external battery packs BP72V15-2U (limit 1) and BP72V28RT-3U (multi-pack
battery runtime	compatible)
DC system voltage	72VDC
Typical battery	3-6 years, depending on usage
lifespan
Battery recharge	less than 6 hours to 80%
rate
Replacement	RBC96-3U (qty 2)
Battery Cartridge

VOLTAGE REGULATION

Voltage regulation description

Overvoltage correction

Brownout correction

On-line, double-conversion power conditioning maintains output within 2% of 110/120 volts at all times

Maintains output of selected nominal +/-2% during overvoltages to 138V AC

Maintains output of selected nominal +/-2% during undervoltages to 65V AC (at loads greater than 70% undervoltage correction extends to 80V)

LEDS ALARMS & SWITCHES

Front panel LEDs

LED STATUS DISPLAY: line power (green), online (green), bypass (yellow), on battery (green), overload (red), battery low (yellow) - 4 LED LOAD / BATTERY LEVEL DISPLAY (100%, 75%, 50%, 25%). LCD display panel easily rotates for viewing in rackmount or tower configurations.

Alarms

Multi-function audible alarm with distinctive ring patterns offer notification of backup operation (2 seconds on / 0.5 seconds off), low battery warning (1.25 seconds on / 0.5 seconds off), overload (sounds continuously), UPS fault (4.2 seconds on / 1 second off), input voltage out of frequency (2.1 seconds on / 0.14 seconds off) and high input voltage (2.1 seconds on 0.07 seconds off)

Switches

Includes power off/on switch to enable system turn on (press ON switch), UPS battery test (press ON switch during normal AC operation), buzzer silence (press ON switch during battery operation) and OFF (press OFF switch) - all switch functions require that the switch be pressed and held for longer than 2 seconds, but less than 4 seconds

SURGE / NOISE SUPPRESSION

AC surge suppression

AC suppression response time

Dataline suppression

480joules

Instantaneous

Set of 8 wire RJ style interface jacks offer surge suppression for network ethernet or TEL/DSL connection. Pins 1,2,3 and 6 offer ethernet protection starting at 7.5V and the center two wires, pins 4 & 5, offer TEL/DSL line suppression starting at 260V