Tripp Lite SU8000RT3UN50 Battery, Leds Alarms & Switches, Surge / Noise Suppression, Physical

Recommended	208/240V AC 50A circuit with either a 50A Hubbell CS8264C female connector or CS8269 wall receptacle
Electrical Service
BATTERY
Full load runtime	6 min. (8000VA/6400W)
Half load runtime	15 min. (4000VA/3200W)
Expandable battery	Runtime is expandable with optional external battery packs
runtime
Connects to UPS via	Included 3-wire DC cable
DC system voltage	240VDC
Typical battery	4-6 years
lifespan
Battery recharge rate	Less than 8 hours to 90% (included battery set only)
VOLTAGE REGULATION
Voltage regulation	On-line, double-conversion process give this UPS the ability to maintain output voltage within +/-2% of selected
description	nominal voltage at all times
Overvoltage	Maintains continuous operation without using battery power during overvoltages to 276V AC, regulating output within
correction	2% of selected nominal
Brownout correction	Maintains continuous operation without using battery power during brownout / undervoltage conditions to 156V AC,
	regulating output within 2% of selected nominal

LEDS ALARMS & SWITCHES

Front panel LEDs

Alarms

Switches

6 LED DISPLAY: line power, bypass, inverter, charger, output AC and battery operation. LED/LCD display panel easily rotates for viewing in rackmount or tower configurations.

Multi-function audible alarm offers notification of UPS start, backup operation, low battery, overload, UPS fault, inverter fault, DC bus fault, overtemperature, remote shutdown, shutdown imminent and shutdown complete

Includes main power off/on switch, plus 2 switches to set and execute scrollable LCD functions

SURGE / NOISE SUPPRESSION

AC suppression	Instantaneous
response time
EMI / RFI AC noise	Yes
suppression
PHYSICAL
Shipping weight (lbs)	331
Shipping weight (kg)	150.3
Shipping Dimensions	39.75 x 31.5 x 23
(HWD/in)
Shipping Dimensions	101 x 80 x 58.4
(HWD/cm)
Unit weight (lbs)	Power Module 55 lbs., Battery Pack: 136.5 lbs.
Unit weight (kg)	Power Module 25 kg., Battery Pack: 62 kg
Unit Dimensions	Power Module 5.14 x 17.5 x 25, Battery Pack 5.16 x 17.5 x 25 (Installed depth of power module extends to 32.5 inches
(HWD/in)	once detachable PDU backplate is installed)
Unit Dimensions	Power Module 13.3 x 44.4 x 63.5, Battery Pack 13.4 x 40.6 x 63.5 (Installed depth of power module extends to 82.6 cm
(HWD/cm)	once detachable PDU backplate is installed)
Material of	Steel
construction
Form factors	Rack (6U)
supported
Cooling method	Fan
Battery Access	User replaceable, hot swappable external battery pack
ENVIRONMENTAL