Tripp Lite U205-004-R user manual Installation

Installation

DC 5V 2.1A

1

3

A Connector

2

4

B Connector

1.Plug the power adapter into the jack on the side panel of the HUB (optional)

2.Plug the B type connector into the upstream port (Root port) of the HUB

3.Plug the A type connector into the Host

4.Connect all USB Devices to the HUB Host Power Mode Setting.

There are two power modes: Self-Powered mode and Bus-powered mode. For Self-Powered mode the HUB provides all the downstream ports with DC + 5V, 500mA (max) power supply per port. For the Bus-powered mode, the Hub only provides the four downstream ports (Port1 to Port4) with DC + 5V, 500mA in total.

Note: When cascading many Hubs, the upstream Hubs must always be set into the Self-powered mode, only the last hub can be set into Bus-powered mode.

4